Role of CYP2D6 and CYP3A4 polymorphisms on aripiprazole and dehydroaripiprazole concentrations in patients undergoing long-acting treatment.

Aripiprazole once-monthly (AOM) exhibits an important interindividual pharmacokinetic variability with significant implications for its clinical use. CYP2D6 and CYP3A4 highly contributes to this variability, as they metabolize aripiprazole (ARI) into its active metabolite, dehydroaripiprazole (DHA) and the latter into inactive metabolites. This study aims to evaluate the effect of CYP2D6 and CYP3A4 polymorphisms in combination and the presence of concomitant inducers and inhibitors of this cytochromes on ARI and DHA plasma concentrations in a real clinical setting. An observational study of a cohort of 74 Caucasian patients under AOM treatment was conducted. Regarding CYP2D6, higher concentrations were found for active moiety (ARI plus DHA) (AM) (67 %), ARI (67 %) and ARI/DHA ratio (77 %) for poor metabolizers (PMs) compared to normal metabolizers (NMs). No differences were found for DHA. PMs for both CYP2D6 and CYP3A4 showed a 58 % higher AM and 66 % higher plasma concentration for ARI compared with PMs for CYP2D6 and NMs for CYP3A4. In addition, PMs for both CYP2D6 and CYP3A4 have 45 % higher DHA concentrations than NMs for both cytochromes and 41 % more DHA than PMs for CYP2D6 and NMs for CYP3A4, suggesting a significant role of CYP3A4 in the elimination of DHA. Evaluating the effect of CYPD26 and CYP3A4 metabolizing state in combination on plasma concentrations of ARI, DHA and parent-to-metabolite ratio, considering concomitant treatments with inducers and inhibitor, could optimize therapy for patients under AOM treatment.

Bioavailability of a novel sustained-release pellet formulation of 5-flucytosine in healthy-fed participants for use in patients with cryptococcal meningitis.

Cryptococcal meningoencephalitis (CM) is an opportunistic fungal infection and a major cause of death among people living with human immunodeficiency virus in sub-Saharan Africa. 5-flucytosine (5-FC) is a unique, brain-permeable antifungal agent used to reduce mortality from CM and to prevent disease in individuals carrying cryptococcal antigen. 5-FC has a short plasma half-life, requiring 6-hourly oral dosing with an immediate-release (IR) formulation, a significant challenge in hospital and outpatient settings, risking a lack of compliance. We recently reported the relative bioavailability in fasting conditions of a sustained release (SR) oral pellet formulation of 5-FC. In this phase I study, we assessed the safety and pharmacokinetic profiles of the new 5-FC SR formulation in a single dose (2 × 3000 mg), relative to 5-FC IR tablets (Ancotil®; 1500 mg b.i.d.) in healthy participants in fed conditions. This randomized, two-period crossover study was conducted in South Africa to confirm the dose of the identified 5-FC SR formulation for a twice-daily 5-FC regimen in patients. Thirty-six healthy participants were included. All treatments were well tolerated and no serious adverse event was reported. Cmax and AUC(0-t) for the SR formulation (49.2 ± 10.49 µg/mL and 640.4 ± 126.4 h.µg/mL, respectively) were significantly higher than for the IR formulation (36.8 ± 7.61 µg/mL and 456.6 ± 72.8 h.µg/mL, respectively). A physiological based pharmacokinetic model (PBPK) predicted that under fasting conditions, 6000 mg SR pellets would show a good overlap with the IR product (3000 mg b.i.d), thus 6000 mg SR 5-FC b.i.d. in fasting conditions is recommended.

Gastroretentive Delivery Approach to Address pH-Dependent Degradation of (+)- and (-)-Phenserine.

(-)-Phenserine ("phenserine") and (+)-phenserine (posiphen; buntanetap) are longer-acting enantiomeric analogs of physostigmine with demonstrated promise in the treatment of Alzheimer's and Parkinson's diseases. Both enantiomers have short plasma half-lives, and their pharmacokinetics might be improved through the use of either once or twice-daily administration of an extended-release dosage form. Phenserine was observed to form a colored degradation product in near-neutral and alkaline pH environments, and at pH 7, the half-life of posiphen was determined to be ~ 9 h (40 °C). To limit luminal degradation which would reduce bioavailability, a gastroretentive tablet composed of a polyethylene oxide-xanthan gum matrix was developed. When placed in simulated gastric fluid (pH 1.2), approximately 70% of the phenserine was released over a 12 h period, and no degradants were detected in the release medium. In comparison, a traditional hydrophilic-matrix, extended-release tablet showed measurable amounts of phenserine degradation in a pH 7.2 medium over an 8 h release interval. These results confirm that a gastroretentive tablet can reduce the luminal degradation of phenserine or posiphen by limiting exposure to neutral pH conditions while providing sustained release of the drug over at least 12 h. Additional advantages of the gastroretentive tablet include reduced gastric and intestinal concentrations of the drug resulting from the slower release from the gastroretentive tablet which may also limit the occurrence of the dose-limiting GI side effects previously observed with immediate-release phenserine capsules.

A controlled release antibiotic wound protectant gel formulated for use in austere environments.

Battlefield wounds are at high risk of infection due to gross contamination and delays in evacuation from forward-deployed locations. The aim of this study was to formulate an antibiotic wound gel for application by a field medic in austere environments to protect traumatic wounds from infection during transport. Formulation development was conducted over multiple phases to meet temperature, handling, in vitro elution, and in vivo tissue response requirements. Thermal properties were evaluated by vial inversion, DSC, and syringe expression force in a temperature range of 4-49°C. Handling was evaluated by spreading onto blood-contaminated tissue and irrigation resistance. Controlled antibiotic release was evaluated by a modified USP immersion cell dissolution method. Local tissue effects were evaluated in vivo by subcutaneous implantation in rats for 7 and 28 days. An oleogel composition of cholesterol, hydrogenated castor oil, soybean oil, and glyceryl monocaprylocaprate met the target performance criteria. Peak expression force from a 5 mL syringe at 4°C was 48.3 N, the dropping point temperature was 68°C, and the oleogel formulation could be spread onto blood-contaminated tissue and resisted aqueous irrigation. The formulation demonstrated sustained release of tobramycin in PBS at 32°C for 5 days. Implantation in a rat dorsal pocket demonstrated a slight tissue reaction after 7 days with minimal to no reaction after 28 days, comparable to a commercial hemostat control. Material resorption was evident after 28 days. The formulation met target characteristics and is appropriate for further evaluation in a large animal contaminated blast wound model.

Efficacy of pegylated Graphene oxide quantum dots as a nanoconjugate sustained release metformin delivery system in in vitro insulin resistance model.

Metformin, the primary therapy for type 2 diabetes mellitus (T2DM), showed limitations such as varying absorption, rapid system clearance, required large amount, resistance, longstanding side effects. Use of Nano formulations for pharmaceuticals is emerging as a viable technique to reduce negative consequences of drug, while simultaneously attaining precise release and targeted distribution. This study developed a Polyethylene Glycol conjugated Graphene Oxide Quantum dots (GOQD-PEG) nanocomposite for the sustained release of metformin. Herein, we evaluated the effectiveness of metformin-loaded nanoconjugate in in vitro insulin resistance model. Results demonstrated drug loaded nanoconjugate successfully restored glucose uptake and reversed insulin resistance in in vitro conditions at reduced dosage compared to free metformin.

Lidocaine HCl-Loaded Polyelectrolyte Complex -Poloxamer Thermoresponsive Hydrogel: In Vitro- In Vivo Anesthetic Evaluations for Tooth Socket Wound Delivery.

Local anesthesia is essential in dental practices, particularly for managing pain in tooth socket wounds, yet improving drug delivery systems remains a significant challenge. This study explored the physicochemical characteristics of lidocaine hydrochloride (LH) incorporated into a polyelectrolyte complex and poloxamer thermosensitivity hydrogel, assessing its local anesthetic efficacy in mouse models and its onset and duration of action as topical anesthetics in clinical trials. The thermoresponsive hydrogel exhibited a rapid phase transition within 1-3 minutes and demonstrated pseudo-plastic flow behavior. Its release kinetics followed Korsmeyer-Peppas, with 50% of biodegradation occurring over 48 h. In mouse models, certain thermogels showed superior anesthetic effects, with rapid onset and prolonged action, as evidenced by heat tolerance in tail-flick and hot plate models. In clinical trials, the LH-loaded thermoresponsive hydrogel provided rapid numbness onset, with anesthesia (Ton) beginning at an average of 46.5 ± 22.5 seconds and lasting effectively (Teff) for 202.5 ± 41.0 seconds, ranging from 120 to 240 seconds, indicating sustained release. These results highlight the promising properties of these formulations: rapid onset, prolonged duration, mucoadhesion, biodegradability, and high anesthesia effectiveness. This study demonstrates the potential for advancing local anesthesia across various medical fields, emphasizing the synergy between material science and clinical applications to improve patient care and safety.

A Semi-Mechanistic Physiologically Based Biopharmaceutics Model to Describe Complex and Saturable Absorption of Metformin: Justification of Dissolution Specifications for Extended Release Formulation.

Physiologically based pharmacokinetic (PBPK) or physiologically based biopharmaceutics models (PBBM) demonstrated plethora of applications in both new drugs and generic product development. Justification of dissolution specifications and establishment of dissolution safe space is an important application of such modeling approaches. In case of molecules exhibiting saturable absorption behavior, justification of dissolution specifications requires development of a model that incorporates effects of transporters is critical to simulate in vivo scenario. In the present case, we have developed a semi-mechanistic PBBM to describe the non-linearity of BCS class III molecule metformin for justification of dissolution specifications of extended release formulation at strengths 500 mg and 1000 mg. Semi-mechanistic PBBM was built using physicochemical properties, dissolution and non-linearity was accounted through incorporation of multiple transporter kinetics at absorption level. The model was extensively validated using literature reported intravenous, oral (immediate & extended release) formulations and further validated using in-house bioequivalence data in fasting and fed conditions. Virtual dissolution profiles at lower and upper specifications were generated to justify the dissolution specifications. The model predicted literature as well as in-house clinical study data with acceptable prediction errors. Further, virtual bioequivalence trials predicted the bioequivalence outcome that matched with clinical study data. The model predicted bioequivalence when lower and upper specifications were compared against pivotal test formulations thereby justifying dissolution specifications. Overall, complex and saturable absorption pathway of metformin was successfully simulated and this work resulted in regulatory acceptance of dissolution specifications which has ability to reduce multiple dissolution testing.

Pharmacokinetics of extended-release clarithromycin in patients with Mycobacterium ulcerans infection.

Clarithromycin extended-release (CLA-ER) was used as companion drug to rifampicin (RIF) for Mycobacterium ulcerans infection in the intervention arm of a WHO drug trial. RIF enhances CYP3A4 metabolism, thereby reducing CLA serum concentrations, and RIF concentrations might be increased by CLA co-administration. We studied the pharmacokinetics of CLA-ER at a daily dose of 15 mg/kg combined with RIF at a dose of 10 mg/kg in a subset of trial participants, and compared these to previously obtained pharmacokinetic data. Serial dried blood spot samples were obtained over a period of ten hours, and analyzed by LC-MS/MS in 30 study participants-20 in the RIF-CLA study arm, and 10 in the RIF-streptomycin study arm. Median CLA Cmax was 0.4 mg/L-and median AUC 3.9 mg*h/L, following 15 mg/kg CLA-ER. Compared to standard CLA dosed at 7.5 mg/kg previously, CLA-ER resulted in a non-significant 58% decrease in Cmax and a non-significant 30% increase in AUC. CLA co-administration did not alter RIF Cmax or AUC. Treatment was successful in all study participants. No effect of CLA co-administration on RIF pharmacokinetics was observed. Based on our serum concentration studies, the benefits CLA-ER over CLA immediate release are unclear.

Pharmacokinetic Bioequivalence and Safety Assessment of Two Venlafaxine Hydrochloride Extended-Release Capsules in Healthy Chinese Subjects Under Fed Conditions: A Randomized, Open-Label, Single-Dose, Crossover Study.

BACKGROUND AND OBJECTIVE: Venlafaxine hydrochloride extended-release (ER) capsules are commonly used to treat depression and anxiety disorders. Evaluation of the bioequivalence of generic formulations with reference products is essential to ensure therapeutic equivalence. The objective of this study was to evaluate the bioequivalence, safety, and tolerability of Chinese-manufactured venlafaxine hydrochloride extended-release capsules compared with USA-manufactured EFFEXOR® XR in healthy Chinese volunteers under fed conditions. METHODS: A randomized, open-label, single-dose, crossover study was conducted. Subjects were randomly assigned to receive the test formulation (one 150-mg ER capsule manufactured in China) or the reference formulation (one 150-mg ER capsule manufactured in the USA). The bioequivalence of the two drugs was assessed using the area under the plasma concentration-time curve from time zero to the last sampling time (AUC0-t) and the maximum observed concentration (Cmax). RESULTS: A total of 28 subjects were enrolled and randomly assigned to receive a single dose of either the test or reference capsule. All the subjects completed the study and were included in the pharmacokinetic (PK) and safety analyses. The mean AUC0-t and Cmax of venlafaxine and its active metabolite O-desmethylvenlafaxine were comparable between the test and reference products with both parameters close to 100% and the corresponding 90% confidence intervals within the specified 80-125% bioequivalence boundary. Safety was also assessed between the two products and all adverse events (AEs) in this study were mild in severity. CONCLUSIONS: Both the test and reference venlafaxine hydrochloride ER capsules were bioequivalent and showed a similar safety and tolerability profile in the population studied. CLINICAL TRIALS REGISTRATION: This study was registered at the Drug Clinical Trial Registration and Information Publicity Platform ( http://www.chinadrugtrials.org.cn/index.html ) with registration number CTR20211243, date: June 1, 2021.

Poly(l-threonine-co-l-threonine Succinate) Thermogels for Sustained Release of Lixisenatide.

Negatively charged poly(l-Thr-co-l-Thr succinate) (PTTs) was developed as a new thermogel. Aqueous PTT solutions underwent thermogelation over a concentration range of 6.0-8.3 wt %. Dynamic light scattering, FTIR, 1H NMR, and COSY spectra revealed the partial strengthening of the ß-sheet conformation and the dehydration of PTTs during the transition. Extendin-4 was released from the PTTs thermogel with a large initial burst release, whereas positively charged lixisenatide significantly reduced its initial burst release to 25%, and up to 77% of the dose was released from the gel over 14 days. In vivo study revealed a high plasma concentration of lixisenatide over 5 days and hypoglycemic efficacy was observed for type II diabetic rats over 7-10 days. The biocompatible PTTs were degraded by subcutaneous enzymes. This study thus demonstrates an effective strategy for reducing the initial burst release of protein drugs from thermogels with the introduction of electrostatic interactions between the drug and the thermogel.

Spatiotemporally Controlled Release of Etamsylate from Bioinspired Peptide-Functionalized Nanoparticles Arrests Bleeding Rapidly and Improves Clot Stability in a Rabbit Internal Hemorrhage Model.

Achieving rapid clotting and clot stability are important unmet goals of clinical management of noncompressible hemorrhage. This study reports the development of a spatiotemporally controlled release system of an antihemorrhagic drug, etamsylate, in the management of internal hemorrhage. Gly-Arg-Gly-Asp-Ser (GRGDS) peptide-functionalized chitosan nanoparticles, with high affinity to bind with the GPIIa/IIIb receptor of activated platelets, were loaded with the drug etamsylate (etamsylate-loaded GRGDS peptide-functionalized chitosan nanoparticles; EGCSNP). Peptide conjugation was confirmed by LCMS, and the delivery system was characterized by DLS, SEM, XRD, and FTIR. In vitro study exhibited 90% drug release till 48 h fitting into the Weibull model. Plasma recalcification time and prothrombin time tests of GRGDS-functionalized nanoparticles proved that clot formation was 1.5 times faster than nonfunctionalized chitosan nanoparticles. The whole blood clotting time was increased by 2.5 times over clot formed under nonfunctionalized chitosan nanoparticles. Furthermore, the application of rheometric analysis revealed a 1.2 times stiffer clot over chitosan nanoparticles. In an in vivo liver laceration rabbit model, EGCSNP spatially localized at the internal injury site within 5 min of intravenous administration, and no rebleeding was recorded up to 3 h. The animals survived for 3 weeks after the injury, indicating the strong potential of the system for the management of noncompressible hemorrhage.

Cellulose ether and carbopol 971 based gastroretentive controlled release formulation design, optimization and physiologically based pharmacokinetic modeling of ondansetron hydrochloride minitablets.

This study aims to design and optimize ondansetron (OND) gastro-retentive floating minitablets for better and prolonged control of postoperative nausea and vomiting (PONV) with improved patient compliance. Minitablets were directly compressed and encapsulated in a size 2 capsule shell with an overall dose of 24 mg. Central composite design (CCD) was applied keeping one cellulose ether derivative HPMC K15M and Carbopol 971 as variable and used as swelling and rate retarding agents. The other cellulose derivative i.e. sodium carboxymethyl cellulose, along with mannitol, sodium bicarbonate, and talc, were used in fixed quantities. The floating lag time, total floating time, swelling index, in-vitro drug release, and zero-order (RSQ value), were critical quality parameters. The optimized formulation (Fpred) was evaluated for all critical parameters, along with surface morphology, thermal stability, chemical interaction, and accelerated stability. The in silico PBPK modeling was applied to compare the bioavailability of Fpred with reference OND immediate-release tablets. The numerical optimization model predicted >90 % drug release with zero-order at 12 h. In silico PBPK modeling revealed comparable relative bioavailability of Fpred with the reference formulation. The gastroretentive floating minitablets of OND were successfully designed for prolonged emesis control in patients receiving chemotherapeutic agents.

HSPiP, Computational, and Thermodynamic Model-Based Optimized Solvents for Subcutaneous Delivery of Tolterodine Tartrate and GastroPlus­Based In Vivo Prediction in Humans: Part II.

In part I, we reported Hansen solubility parameters (HSP, HSPiP program), experimental solubility at varied temperatures for TOTA delivery. Here, we studied dose volume selection, stability, pH, osmolality, dispersion, clarity, and viscosity of the explored combinations (I-VI). Ex vivo permeation and deposition studies were performed to observe relative diffusion rate from the injected site in rat skin. Confocal laser scanning microscopy (CLSM) study was conducted to support ex vivo findings. Moreover, GastroPlus predicted in vivo parameters in humans and the impact of various critical factors on pharmacokinetic parameters (PK). Immediate release product (IR) contained 60% of PEG400 whereas controlled release formulation (CR) contained PEG400 (60%), water (10%) and d-limonene (30%) to deliver 2 mg of TOTA. GastroPlus predicted the plasma drug concentration of weakly basic TOTA as function of pH (from pH 2.0 to 9). The cumulative drug permeation and drug deposition were found to be in the order as B-VI˃ C-VI˃A-VI across rat skin. This finding was further supported with CLSM. Moreover, IR and CR were predicted to achieve Cmax of 0.0038 µg/ mL and 0.00023 µg/mL, respectively, after sub-Q delivery. Added limonene in CR extended the plasma drug concentration over period of 12 h as predicted in GastroPlus. Parameters sensitivity analysis (PSA) assessment predicted that sub-Q blood flow rate is the only factor affecting PK parameters in IR formulation whereas this was insignificant for CR. Thus, sub-Q delivery CR would be promising alternative with ease of delivery to children and aged patient.

Intestinal Absorption Site-Guided Development and Evaluation of Oral Disintegrating Controlled Release Tablets of Mirabegron.

The aim was to employ site-dependent absorption of mirabegron (MB) as a guide for fabrication of oral disintegrating controlled release tablet (ODCRT) which undergoes instantaneous release of loading fraction followed by delayed release of the rest of MB. The goal was to release MB in a manner consistent with the chronobiology of overactive bladder (OAB) syndrome. In situ rabbit intestinal permeability of MB was adopted to assess absorption sites. MB was subjected to dry co-grinding with citric acid to develop the fast-dissolving fraction in the mouth. Delayed release fraction was formulated by ethanol-assisted co-processing with increasing proportions of Eudragit polymer (S100) as pH responsive polymer. The developed dry mixtures underwent thermal (DSC) and physical (X-ray diffraction) characterization, in addition to in vitro release behavior. Optimized fast dissolving and delayed release formulations were mixed with tablet excipient before compression in ODCRT which was assessed for release profile using continuous pH variation. MB underwent preferential permeation through ileum and colon. Co-grinding with citric acid provided co-amorphous powder with fast dissolution. Co-amorphization of MB with Eudragit S100 (1:5) showed pH-dependent release to release most of the dose at pH 7.4. The developed ODCRT released 43.5% of MB in the buccal environment and retained MB at acidic pH to start release at pH 7.4. The study successfully fabricated ODCRT guided by site-dependent absorption. The ODCRT instantaneously released loading fraction to support the patient after administration with delayed fraction to sustain the effect.

The potential of developing high hepatic clearance drugs via controlled release: Lessons from Kirchhoff's Laws.

When a new molecular entity is predicted to exhibit high clearance in humans, pharmaceutical sponsors almost universally search for similar acting back-up compounds that will demonstrate low clearance. Here we show that, except for oral dosing, there can be marked advantages to developing and commercializing controlled release formulations of high clearance drugs, the expertise of readers of this journal. Our recent publications demonstrate that the universally held pharmacokinetic principle that drug delivery rate has no effect on measured drug clearance is not correct. Rather, we show that if clearance from the drug delivery site is markedly less than the iv bolus clearance of a drug, the in vivo drug clearance can be the drug delivery clearance controlled by the designed dosage form. This approach will be especially advantageous for high hepatic clearance drugs. These advantages include not being concerned with: a) saturable nonlinear kinetics, b) significant pharmacogenomic differences, c) drug-drug induction mechanisms, and d) in many cases drug-drug inhibition interactions. This is due to the ability of a drug sponsor to design clearance, independent of the pharmacokinetic characteristics for high clearance compounds, where clearance from the dosage form becomes the drug clearance from the patient. Recognition of this principle, as described here, results from our development of the use of Kirchhoff's Laws from physics to derive rate-defining clearance and rate constant elimination processes independent of differential equation derivations. The key message for readers of this journal is that high clearance drugs are potentially drugable through formulation design and should not be outright disregarded, since for such drugs the dose-corrected area under the curve can be increased if the release rate from the injection site is controlled and slow resulting in drug clearance from the body controlled by clearance from the dosage form. The concepts presented here describe previously unrecognized advantages of controlled release formulations.

Polystyrene Sulfonate Resin as an Ophthalmic Carrier for Enhanced Bioavailability of Ligustrazine Phosphate Controlled Release System.

Topical ocular sustained-release drug delivery systems represent an effective strategy for the treatment of ocular diseases, for which a suitable carrier has yet to be sufficiently developed. Herein, an eye-compatible sodium polystyrene sulfonate resin (SPSR) was synthesized with a uniform particle size of about 3 µm. Ligustrazine phosphate (LP) was adsorbed to SPSR by cation exchange to form LP@SPSR. LP@SPSR suspension eye drops were further developed using the combination of Carbopol 934P and xanthan gum as suspending agents. The LP@SPSR suspension showed a sustained release in vitro, which was consistent with the observed porcine corneal penetration ex vivo. Pharmacokinetics in tear fluid of rabits indicated that LP@SPSR suspension led to prolonged ocular retention of LP and a 2-fold improved the area under the drug concentration-time curve (AUC0-t). Pharmacokinetics in the aqueous humor of rabbits showed 2.8-fold enhancement in the AUC0-t compared to LP solution. The LP@SPSR suspension exhibited no cytotoxicity to human corneal epithelial cells, nor irritation was observed in rabbit eyes. Thus, the LP@SPSR suspension has been validated as a safe and sustained release system leading to enhanced ophthalmic bioavailability for treating ocular diseases.

Research Progress of Disulfide Bond Based Tumor Microenvironment Targeted Drug Delivery System.

Cancer poses a significant threat to human life and health. Chemotherapy is currently one of the effective cancer treatments, but many chemotherapy drugs have cell toxicity, low solubility, poor stability, a narrow therapeutic window, and unfavorable pharmacokinetic properties. To solve the above problems, target drug delivery to tumor cells, and reduce the side effects of drugs, an anti-tumor drug delivery system based on tumor microenvironment has become a focus of research in recent years. The construction of a reduction-sensitive nanomedicine delivery system based on disulfide bonds has attracted much attention. Disulfide bonds have good reductive responsiveness and can effectively target the high glutathione (GSH) levels in the tumor environment, enabling precise drug delivery. To further enhance targeting and accelerate drug release, disulfide bonds are often combined with pH-responsive nanocarriers and highly expressed ligands in tumor cells to construct drug delivery systems. Disulfide bonds can connect drug molecules and polymer molecules in the drug delivery system, as well as between different drug molecules and carrier molecules. This article summarized the drug delivery systems (DDS) that researchers have constructed in recent years based on disulfide bond drug delivery systems targeting the tumor microenvironment, disulfide bond cleavage-triggering conditions, various drug loading strategies, and carrier design. In this review, we also discuss the controlled release mechanisms and effects of these DDS and further discuss the clinical applicability of delivery systems based on disulfide bonds and the challenges faced in clinical translation.

Development of a population pharmacokinetic model for the novel long-acting injectable antipsychotic risperidone ISM®.

AIMS: The aims of this study were to develop a population pharmacokinetic (PK) model for risperidone ISM® and to investigate the relationships between active moiety exposure, as described by apparent clearance (CL40), and several covariates using all data from five clinical studies. METHODS: A population PK model was developed using active moiety concentrations from a study in healthy volunteers and two studies in patients with schizophrenia. Data from a comparative bioavailability study in medically stable patients and a Phase III study in patients with acute exacerbation of schizophrenia were then incorporated, using empirical Bayesian feedback and model refinement in NONMEM. Finally, covariate analysis was performed on CL40. RESULTS: The final model adequately described the pharmacokinetics of 6288 active moiety concentrations in 17 healthy volunteers and 430 patients with schizophrenia. This one-compartment disposition model had a complex absorption process, combining a small amount immediately entering the central active moiety compartment, two first-order absorption processes and a combined zero-order and first order process, with first-order elimination from the central compartment. Significant covariates on CL40 were BMI and sex. Goodness-of-fit (GOF) plots and visual predictive checks (VPC) confirmed acceptable description of the data. CONCLUSIONS: The population PK model adequately described active moiety concentrations from five clinical studies after risperidone ISM® administration. Relationships between active moiety exposure and covariates were defined in order to facilitate simulations for future studies. The model showed that risperidone ISM® rapidly achieves therapeutic plasma levels within the first hours after the first injection that are maintained sustainedly throughout the whole dosing interval following once-monthly gluteal injections of 100 mg and 75 mg.

Enhanced ophthalmic bioavailability and stability of atropine sulfate via sustained release particles using polystyrene sulfonate resin.

Atropine sulfate (ATS) eye drops at low concentrations constitute a limited selection for myopia treatment, with challenges such as low ophthalmic bioavailability and inadequate stability. This study proposes a novel strategy by synthesizing ophthalmic sodium polystyrene sulfonate resin (SPSR) characterized by a spherical shape and uniform size for cationic exchange with ATS. The formulation of ATS@SPSR suspension eye drops incorporates xanthan gum and hydroxypropyl methylcellulose (HPMC) as suspending agents. In vitro studies demonstrated that ATS@SPSR suspension eye drops exhibited sustained release characteristics, and tropic acid, its degradation product, remained undetected for 30 days at 40 °C. The ATS levels in the tear fluids and aqueous humor of New Zealand rabbits indicated a significant increase in mean residence time (MRT) and area under the drug concentration-time curve (AUC0-12h) for ATS@SPSR suspension eye drops compared to conventional ATS eye drops. Moreover, safety assessment confirmed the non-irritating nature of ATS@SPSR suspension eye drops in rabbit eyes. In conclusion, the cation-responsive sustained-release ATS@SPSR suspension eye drops enhanced the bioavailability and stability of ATS, offering a promising avenue for myopia treatment.

Injectable hydrogel based on liposome self-assembly for controlled release of small hydrophilic molecules.

Controlled release of low molecular weight hydrophilic drugs, administered locally, allows maintenance of high concentrations at the target site, reduces systemic side effects, and improves patient compliance. Injectable hydrogels are commonly used as a vehicle. However, slow release of low molecular weight hydrophilic drugs is very difficult to achieve, mainly due to a rapid diffusion of the drug out of the drug delivery system. Here we present an injectable and self-healing hydrogel based entirely on the self-assembly of liposomes. Gelation of liposomes, without damaging their structural integrity, was induced by modifying the cholesterol content and surface charge. The small hydrophilic molecule, sodium fluorescein, was loaded either within the extra-liposomal space or encapsulated into the aqueous cores of the liposomes. This encapsulation strategy enabled the achievement of controlled and adjustable release profiles, dependent on the mechanical strength of the gel. The hydrogel had a high mechanical strength, minimal swelling, and slow degradation. The liposome-based hydrogel had prolonged mechanical stability in vivo with benign tissue reaction. This work presents a new class of injectable hydrogel that holds promise as a versatile drug delivery system. STATEMENT OF SIGNIFICANCE: The porous nature of hydrogels poses a challenge for delivering small hydrophilic drug, often resulting in initial burst release and shorten duration of release. This issue is particularly pronounced with physically crosslinked hydrogels, since their matrix can swell and dissipate rapidly, but even in cases where the polymers in the hydrogel are covalently cross-linked, small molecules can be rapidly released through its porous mesh. Here we present an injectable self-healing hydrogel based entirely on the self-assembly of liposomes. Small hydrophilic molecules were entrapped inside the extra-liposomal space or loaded into the aqueous cores of the liposomes, allowing controlled and tunable release profiles.